The Bromic Platinum Smart-Heat Electric Marine 2300W is a slim, hard-wired infrared heater for covered outdoor areas such as patios, alfresco dining spaces and semi-enclosed rooms. This black 240V model (part number BH0320015) heats about 65 sq ft and draws 9.6A at 220-240V. The body is 316 marine-grade stainless steel with a tinted glass-ceramic front that spreads heat evenly and keeps visible glow low. The 316 marine-grade build is meant for coastal and corrosive sites, and the sealed element compartment resists corrosion. It mounts to a wall or ceiling with the included bracket, or can be recessed with an optional kit, and must be installed by a licensed electrician.
Features:
- Slim profile suits low clearances and can be recessed flush into a ceiling
- Tinted glass-ceramic fascia spreads heat evenly with minimal light emission
- 316 marine-grade stainless steel body for coastal and marine-environment sites (land-based)
- Adjustable mounting bracket lets you aim the heat
- Wall, ceiling, recessed and suspension-pole mounting options
- Works with Bromic Affinity On/Off and Affinity Dimmer controls (0-100% output) or a manual wall switch
- Sealed compartment with thin-film elements to resist corrosion
The Bromic Platinum Smart-Heat Electric Marine 2300W is a slim, hard-wired infrared heater for covered outdoor areas such as patios, alfresco dining spaces and semi-enclosed rooms. This black 240V model (part number BH0320015) heats about 65 sq ft and draws 9.6A at 220-240V. The body is 316 marine-grade stainless steel with a tinted glass-ceramic front that spreads heat evenly and keeps visible glow low. The 316 marine-grade build is meant for coastal and corrosive sites, and the sealed element compartment resists corrosion. It mounts to a wall or ceiling with the included bracket, or can be recessed with an optional kit, and must be installed by a licensed electrician.
Features:
- Slim profile suits low clearances and can be recessed flush into a ceiling
- Tinted glass-ceramic fascia spreads heat evenly with minimal light emission
- 316 marine-grade stainless steel body for coastal and marine-environment sites (land-based)
- Adjustable mounting bracket lets you aim the heat
- Wall, ceiling, recessed and suspension-pole mounting options
- Works with Bromic Affinity On/Off and Affinity Dimmer controls (0-100% output) or a manual wall switch
- Sealed compartment with thin-film elements to resist corrosion
Part Number: BH0320015
Wattage: 2300W
Voltage: 220-240V AC, 50/60Hz
Amperage: 9.6A
Heating Area: 65 sq ft
Dimensions: 33.0" W x 7.0" H x 2.0" D (840 x 182 x 54 mm)
Weight: 16.5 lbs
Color: Black
Material: 316 marine-grade stainless steel with tinted glass-ceramic face
IP Rating: IPX5
Fuel Type: Electric (hard-wired)
Mounting: Wall or ceiling (bracket included); recessed (kit sold separately); ceiling suspension pole 2 ft or 4 ft (sold separately)
Minimum Mounting Height: 72" above floor (wall mount); 96" above floor (ceiling mount)
Clearances: 39.4" (1000mm) clear in front of the heater; 20" (500mm) between heaters
Recess Mounting: Ceiling recess kit BH3130034 needs 10" of space above the heater; a low-clearance recess kit (with a cooling fan on its own power supply) is available
Certification: Intertek ETL / cETL 5001799
Warranty: 5 years for land-based installations; 3 years on marine vessels (per Bromic US spec table)
Compatible With: Bromic Affinity On/Off controller, Affinity Dimmer, manual wall switch (controllers sold separately)
Included: Heater and 8" (200mm) mounting bracket; controllers and other mounting accessories not included
Use: Land-based and coastal installations; marine-grade 316 stainless steel
